One-car garage
About 250 sq ft- Flake floor
- $2,000–$2,250
- Metallic floor
- $2,000–$3,500
How much does an epoxy floor cost?
Real price ranges for garages, homes and commercial floors in McAllen and the Rio Grande Valley, and what moves the number up or down.
Garage floor prices
Installed prices for a standard Valley garage with grinding and crack repair included.
Two-car garage
About 450 sq ft- Flake floor
- $2,250–$4,050
- Metallic floor
- $3,600–$6,300
Three-car garage
About 650 sq ft- Flake floor
- $3,250–$5,850
- Metallic floor
- $5,200–$9,100
Includes diamond grinding, crack repair, materials and laborResidential minimum $2,000
Price per square foot, by system
Typical installed ranges in the Valley. Bigger floors land toward the low end; small rooms, heavy repairs and specialty finishes toward the high end.
- Neat SystemMulti-layer · Solid color$3.50–$6 / sq ft
- Urethane CementFood & beverage · Heavy duty$9–$15 / sq ft
- ESD FlooringStatic dissipative · Conductive$8–$14 / sq ft
- Quartz SystemSlip resistant · Multi-layer$7–$11 / sq ft
- Polished ConcreteGrind · Densify · Polish$3–$7 / sq ft
- Commercial KitchensUrethane · Quartz · Protect-All$9–$16 / sq ft
- Flake SystemDecorative chip · Polyaspartic$5–$9 / sq ft
- Metallic SystemLiquid marble · 3D effect$8–$14 / sq ft
What changes the price
The slab. Cracks, spalls and uneven joints need repair before coating. Moisture coming up through the concrete, common in the Valley, needs a moisture-tolerant primer.
Old coatings, paint or tile. Removal adds about $1–$3 per sq ft.
The system. A flake garage floor and a food-plant urethane cement floor are different products with different build thickness.
Size and access. Equipment and crew time are the same for a small room as for a big garage, so small jobs cost more per square foot. Commercial jobs worked at night or in phases are scheduled around you.
Store kit or professional floor?
Big-box epoxy kits run a few hundred dollars. They're a thin coat rolled over concrete that hasn't been ground, so hot tires and Valley heat lift them, usually within a year or two.
- Surface prepDiamond grinding
- BuildSeveral coats, full flake
- TopcoatUV-stable polyaspartic
- Hot-tire pickupResists it
Financing through Synchrony
Apply for financing
12 months promotional financing
Get the floor now and pay it off over time. Subject to credit approval; the application takes a few minutes.
Cost questions
How much is an epoxy garage floor per square foot?
In the Valley a professional flake floor with a polyaspartic topcoat runs about $5–$9 per sq ft. Metallic floors run about $8–$14. Industrial systems are priced after a site visit.
How much does it cost to epoxy a two-car garage?
About $2,250–$4,050 for a standard 450 sq ft two-car garage with a full flake system. Cracks, old coatings or moisture problems add to that.
Is there a minimum job size?
Yes. Residential jobs start around $2,000 and commercial jobs around $2,500, because prep equipment and crew time are the same whether the floor is big or small.
Is polyaspartic better than epoxy?
For garages and patios in the Valley, usually yes as a topcoat. Polyaspartic is UV-stable, cures in hours and resists hot-tire pickup. We often use an epoxy base with a polyaspartic top.
Is a DIY epoxy kit worth it?
Store kits cost a few hundred dollars but are thin and go over unground concrete, so they often peel under hot tires within a year or two. A professional floor includes diamond grinding, crack repair and a much thicker build.
Do you offer financing?
Yes, 12 months promotional financing through Synchrony, subject to credit approval.
Get an exact price for your floor.
Answer five quick questions for a preliminary range, then we'll confirm it with a free site visit.